UCC5619MWPTR

UCC5619MWPTR Overview

It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 27 termination. The 36-BSOP (0.295, 7.50mm Width) is well known in the electronic industry due to its low package cost. The Packaging follows Tape & Reel (TR)'s materials. The PCB is mounted using Surface Mount. It should not exceed 0°C~70°C°C when operating. The material qualifies for standard applications as a SCSI-qualified material. Using Base Part Number UCC5619 will allow you to find related parts. For specific uses, 36 pins are included. There are 27?signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. For high efficiency, it is recommended that the supply voltage is maintained at 4.75V. On it is a Surface Mount-mount. It belongs to the Subcategory Bus Terminators. Communication devices such as computers use 36 pins, which are pronged contacts. There is a requirement for 4.75V Power Supplies in order to operate. Here is the resistance of this electrical device: 110Ohm (Ω). As the device can operate at supply voltages of 65mA, it is suitable for a wide range of applications. It runs on a minimal voltage of 4V. At maximum 7V, the voltage is maximum.

UCC5619MWPTR Features

27 terminations
Tape & Reel (TR) package
UCC5619 family
36 pin count
27 signal lines
36 pins
4.75V power supplies

UCC5619MWPTR Applications

There are a lot of Texas Instruments UCC5619MWPTR Signal Terminators applications.

• plotters
• High speed protected termination for digital input with serialized SPI output
• Desktop PCs
• Telecommunication Equipment
• Server and workstation
• workstations
• personal computers
• Network attached storage (NAS)
• PCI Cards
• Programmable logic controller and remote input modules