UC5601N

UC5601N Overview

A 18 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. A well-known feature of the 24-DIP (0.600, 15.24mm) is its low packaging cost. Materials used for packaging are the same as those used by Tube. This is done using Through Hole for mounting on a PCB. There should not be an increase in Operating Temperature over 0°C~70°C. SCSI-qualified material suitable for standard applications. Ensure normal operation by providing a 4V~5.25V Supply Voltage. You can use Base Part Number UC5601 to locate related parts. For specific purposes, 24 pins are included. In terms of 18 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. In order to maintain high efficiency, the supply voltage should be kept at 4.75V. A Through Hole-mount is on it. A subcategory of Subcategory Bus Terminators contains it. Computers, phones, and other communication devices have pronged contacts called 24 pins. It is necessary to use 5V Power Supplies to operate this system. Resistance is?a measure of the opposition to current flow in an electrical circuit. ?The resistance of this electrical device is 110Ohm (Ω). A certain amount of current is required by 5.25V in order to work properly.

UC5601N Features

18 terminations
Tube package
UC5601 family
24 pin count
18 signal lines
24 pins
5V power supplies

UC5601N Applications

There are a lot of Texas Instruments UC5601N Signal Terminators applications.

• Programmable logic controller
• Data Networking
• laser printers
• Data Routers
• Programmable logic controller and remote input modules
• Remote input module
• PCI Cards
• High speed protected termination for digital input with serialized SPI output
• Desktop PCs
• tape drives