UC5601DWP

UC5601DWP Overview

An example of a 18 termination would be one in which the characteristic impedance of the transmission line is matched to the device terminating the transmission line. Its low package cost makes the 28-SOIC (0.295, 7.50mm Width) very popular in the electronics industry. Tube's materials are followed in the packaging. A PCB is mounted with Surface Mount. In order to prevent overheating, the Operating Temperature should not exceed 0°C~70°C degrees Celsius. For standard applications, it is SCSI-qualified. There is a 4V~5.25V Supply Voltage provided to ensure normal operation. If you are looking for related parts, you can use Base Part Number UC5601. Specific uses are provided with 28 pins. A 18 signal line is one that is exclusively used for transmitting signals or intelligence, or for public or private communication. For high efficiency, it is recommended that the supply voltage is maintained at 4.75V. Surface Mount-mounts are on it. A subcategory Bus Terminators belongs to it. It is common for computers and other communication devices to use pronged contacts, called 28 pins. A 5V Power Supply is required to operate the system. Here is the resistance of this electrical device: 110Ohm (Ω). As the device is able to operate on 400mA supply voltages, it can be used in a wide range of applications. There can be up to 1 eligible receivers/drivers on the field at once for this electronic part.

UC5601DWP Features

18 terminations
Tube package
UC5601 family
28 pin count
18 signal lines
28 pins
5V power supplies

UC5601DWP Applications

There are a lot of Texas Instruments UC5601DWP Signal Terminators applications.

• CSU and DSU
• USB hubs
• personal computers
• Data Switches
• Programmable logic controller
• Network attached storage (NAS)
• Programmable logic controller and remote input modules
• High speed protected termination for digital input with serialized SPI output
• Data Networking
• laser printers