TPS3106K33MDBVREP

TPS3106K33MDBVREP Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. There are SOT-23-6 functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 3.3V. Power management conducts at a voltage of 1. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 6 pins on IC management. There are 6 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 400mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 3.3V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 32μA supply current present in the power management. It is always advisable to use TPS3106K33, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 32μA.

TPS3106K33MDBVREP Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 400mV
32μA operating supply current

TPS3106K33MDBVREP Applications

There are a lot of Texas Instruments TPS3106K33MDBVREP Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Stable power system
• Battery cars
• Electronics installed in the vehicle
• DC stabilized power supply module
• Leakage current detection
• FPGA design
• Refrigeration
• Battery cars
• emergency room