TIBPAL20R6-15CFN

TIBPAL20R6-15CFN Overview

Mounting is done with the Type Surface Mount method.Programmable logic devices are PAL that is programmable.There is no better value on the market than IMPACT-X? PAL? Series in terms of performance and cost.Electronics manufacturers use the 28-LCC (J-Lead) because of Programmable logic array's package.Programmable array logic's Packaging is made of Tube-materials.In the PLD stock, TIBPAL20R6 corresponds to the largest part.Surface Mount is the direction in which the PLD is mounted.There is no change to the pin number for the Complex Programmable logic device, which remains 28.The 50MHz frequency can still be used precisely.As of now, 75°C is the maximum working temperature.If it's operating properly, it should be warmer than 0°C.Supply voltage must be 4.75V volts for it to operate.There is 5.25V supply voltage that can be used with Programmable logic controller.2 I/Os on it can be programmed.Programmable logic devices are always powered by 5V.The 12 inputs are embedded into the PLD.Programming has included a 28 termination.In this case, the Programmable Logic Devices subcategory can be applied.There are 5V supplies in the Programmable logic device.In this case, 64 refers to the number of product terms available.Numerous 8 outputs are present.5V voltage is needed to operate it.It has a sum of 28 pins. REGISTER PRELOAD; POWER-UP RESET, to name a few, is among the additional Features.

TIBPAL20R6-15CFN Features

Mounting type of Surface Mount
Maximum temperature of 75°C
2 I/Os

TIBPAL20R6-15CFN Applications

There are a lot of Texas Instruments TIBPAL20R6-15CFN PLDs (Programmable Logic Device) applications.

• Low power applications
• Power-limited applications
• High performance applications
• Highly complex logic
• Programmable Logic Devices
• High-speed Devices
• Software
• Various types of power-limited applications
• Electrically Devices
• Industrial