SN74LS293N

SN74LS293N Overview

A 14-DIP (0.300, 7.62mm)package is used for this device. Using 14terminations, it can be configured. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. There are wires connecting 1elements. As a result, it is packaged in the way of a Tube. There are 14 pins going on to connect other parts in the circuit. The way of Through Hole is used to mount it. In this case, it belongs to the family of [0]. The 74LSseries is well suited to a number of uses. It is adopted that the logic type is [0]. It is recommended that the operating temperature be set to 0°C~70°C. In this case, it is mounted with a Through Holetype. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Each element in the array stores 4 bits. These electronic devices have many important features, and DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONSis one of them. There are more related parts under the 74LS293base part number. Voltage from the voltage source is [0]. In order to operate, it requires a voltage of [0]. It operates with the frequency of 42MHz.

SN74LS293N Features

Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
DIVIDE BY 2 AND DIVIDE BY 8 FUNCTIONS
Operating supply voltage of 5V
Frequency of 42MHz

SN74LS293N Applications

There are a lot of Texas Instruments SN74LS293N Counters & Dividers applications.

• Up Counters
• Time delay circuits
• Analog multiplexing and demultiplexing
• Timing applications
• Divide-by"N" counters/frequency synthesizers
• Programmable decade counters
• Time-delay circuits
• Frequency dividers
• Fixed and programmable counters greater than 10
• Communications Digital Frequency Synthesizers;