SN74HC112D

SN74HC112D Overview

The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. This output is configured with Differential. It is configured with a trigger that uses a value of Negative Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type JK Typeof flip flops. The 74HCseries comprises this type of FPGA. You should not exceed 60MHzin its output frequency. Terminations are 16. The 74HC112 family contains it. A voltage of 5V is used as the power supply for this D latch. There is 3pF input capacitance for this T flip flop. An electronic device belonging to the family HC/UHcan be found here. There is an electronic component mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Negative Edge. There is a base part number FF/Latchesfor the RS flip flops. As soon as 6Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be kept above 2V. Due to its superior flexibility, it uses 2 circuits. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 5.2mA. In order for the chip to function, it has 3output lines. Despite external influences, it consumes 4μAof quiescent current.

SN74HC112D Features

Tube package
74HC series
16 pins

SN74HC112D Applications

There are a lot of Texas Instruments SN74HC112D Flip Flops applications.

• ESD performance
• Shift Registers
• Automotive
• ATE
• Data Synchronizers
• Modulo – n – counter
• Digital electronics systems
• Reduced system switching noise
• Pattern generators
• Functionally equivalent to the MC10/100EL29