SN74AC74N

SN74AC74N Overview

14-DIP (0.300, 7.62mm)is the way it is packaged. D flip flop is included in the Tubepackage. T flip flop is configured with an output of Differential. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 74ACseries of FPGAs. This D flip flop should not have a frequency greater than 160MHz. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74AC74. A voltage of 3V provides power to the D latch. This T flip flop has a capacitance of 3pF farads at the input. A device of this type belongs to the family of AC. There is an electronic part mounted in the way of Through Hole. It is designed with 14 pins. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. 6Vis the maximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. The superior flexibility of this product is achieved by using 2 circuits. The D latch runs on a voltage of 3.3/5V volts. Its output current of 24mAallows for maximum design flexibility. Currently, there are 4 lines of input. In terms of quiescent current, it consumes 2μA .

SN74AC74N Features

Tube package
74AC series
14 pins
3.3/5V power supplies

SN74AC74N Applications

There are a lot of Texas Instruments SN74AC74N Flip Flops applications.

• Parallel data storage
• Pattern generators
• Divide a clock signal by 2 or 4
• Load Control
• Shift registers
• Digital electronics systems
• Reduced system switching noise
• ESD protection
• Frequency Divider circuits
• Memory