NB3N51032DTG

NB3N51032DTG Overview

Clock generator is packaged in the way of Tube. The 16-TSSOP (0.173, 4.40mm Width) package includes this clock generator. 16 terminations can be found in frequency generators. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. In this case, Clock, Crystal is designed to be the input of the clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As long as there are 3.135V~3.465V supply voltages provided, clock generator ic should work. Based on test statistics, ambient temperature should be set at -40°C~85°C. The RF synthesizer is compatible with HCSL, LVDS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. There are 16 pins on the frequency generator that are available for use. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. Frequency generator is able to reali200MHze high efficiency when operating at a frequency of 200MHz. To fully perform its function, time clock generator requires a supply current of 100mA. This RF synthesizer operation requires a maximum current of 100mA.

NB3N51032DTG Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V

NB3N51032DTG Applications

There are a lot of ON Semiconductor NB3N51032DTG Clock Generators applications.

• Microwave point-to-point systems
• Aerospace and defense
• Pagers
• Automatic control system test
• Cable television converter boxes
• Mixed mode (analog and digital) applications
• Cell phones
• Bit synchronization
• Reference signals to RF systems
• Melting