All Products

MAX325EUA+

150ns, 100ns SPST - NO/NC 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX325 100pA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Origchip NO: 503-MAX325EUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 992
Description: 150ns, 100ns SPST - NO/NC 60Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX325 100pA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1998
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	60Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	2
Terminal Pitch	0.635mm
Base Part Number	MAX325
Output	SEPARATE OUTPUT
Power Supplies	3.3/5V
Number of Circuits	2
Max Supply Voltage	16V
Min Supply Voltage	2.7V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	240 ns
Supply Type	Single
Turn-Off Delay Time	150 ns
On-State Resistance (Max)	60Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	150ns, 100ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	800m Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.7V~16V
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

MAX325EUA+ Overview

Due to its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. Totally, there are 8 terminations. These analog multiplexers are built based on SPST - NO/NC switching circuits. A total of 2 circuits make up this switch device. Try searching for the analog switch ic with MAX325 if you are looking for variants. As far as internal resistance is concerned, it has 60Ohm. Please refer to the datasheets for 8 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. A analog switch ic that has a cost-effective Single supply type. The lowest voltage fed to the electronic component should be 2.7V. The switch device would be able to operate with 1μA current. This analogue multiplexer requires a voltage of 2.7V~16V when it drains from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.