CURRENCY:USD

All Products

LMC6464BIN

4 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-LMC6464BIN
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 678
  • Description: 4 Channels 75mA per Channel 0.15pA 65 dB Instrumentational OP Amps 0.00001μA 3V~15.5V ±1.5V~7.75V LMC6464 14 Pins 14-DIP (0.300, 7.62mm)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Operational Amplifier
Technology CMOS
Terminal Position DUAL
Number of Functions 4
Supply Voltage 5V
Base Part Number LMC6464
Pin Count 14
Output Type Rail-to-Rail
Power Supplies 3/15V
Number of Channels 4
Operating Supply Current 90μA
Nominal Supply Current 90μA
Output Current 75mA
Max Supply Current 20μA
Slew Rate 0.028V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 65 dB
Current - Input Bias 0.15pA
Voltage - Supply, Single/Dual (±) 3V~15.5V ±1.5V~7.75V
Output Current per Channel 75mA
Input Offset Voltage (Vos) 3mV
Bandwidth 50 kHz
Unity Gain BW-Nom 50 kHz
Voltage Gain 129.54dB
Average Bias Current-Max (IIB) 0.00001μA
Power Supply Rejection Ratio (PSRR) 65dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 16V
Voltage - Input Offset 250μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.00001μA
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

LMC6464BIN Overview


A 14-DIP (0.300, 7.62mm) case is used to package the op amp. An op amp ic of the General Purpose type. Upon delivery, op amp ic is packaged in a Tube case. A total of 14 terminations have been reported in the past few weeks. It consists of a total of 14 pins in total. Please take in mind that op amp should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. An 14-pin op amp ic is included in the package. Op amp ic rates 3mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 90μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 129.54dB. As far as the device is concerned, buffer amplifier has 4 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals.

LMC6464BIN Features


14 Pins
supply voltage of 5V
129.54dB voltage gain
Output Type: Rail-to-Rail

LMC6464BIN Applications


There are a lot of Texas Instruments LMC6464BIN Instrumentational OP Amps applications.

  • Switching amplifier
  • Measurements of Wheatstone bridge
  • Digital cameras
  • Signal transformation
  • Integrator circuits
  • Information processing
  • Thermocouples
  • Broadcasting
  • Inverse/same-phase proportional circuit
  • Image computer boards
How can we help you?