LAMXO1200E-3TN100E

LAMXO1200E-3TN100E Overview

There are 600 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 100-LQFP package.There are 73 I/Os on the board.The device is programmed with 100 terminations.There is a QUADterminal position on the electrical part in question.An electrical supply voltage of 1.2V is used to power it.This part is part of the family [0].It is packaged in the way of Tray.The device operates at a temperature of -40°C~125°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.It is a type of FPGA belonging to the LA-MachXO series.There are 100 pins on the chip.Its related parts can be found in the [0].If high efficiency is desired, the supply voltage should be kept at [0].Data storage is performed using [0].This electronic part is mounted in the way of Surface Mount.The 100pins are designed into the board.There is a maximum supply voltage of 1.26V.A minimum supply voltage of 1.14V is required for it to operate.The system consists of 150 logic blocks (LABs).Fundamental building blocks consist of 1200logic elements/cells.The clock frequency of this device should not exceed 25MHz.This device is configured to output [0].

LAMXO1200E-3TN100E Features

100-LQFP package
73 I/Os
The operating temperature of -40°C~125°C TA
100 pin count
100 pins
150 logic blocks (LABs)
73 outputs

LAMXO1200E-3TN100E Applications

There are a lot of Lattice Semiconductor Corporation LAMXO1200E-3TN100E CPLDs applications.

• Reset swapping
• Software-driven hardware configuration
• Dedicated input registers
• Timing control
• Programmable power management
• Power up sequencing
• Wide Vin Industrial low power SMPS
• SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
• USB Bus
• State machine control