All Products

View All >>

L9733CN

5V N-Channel 0.65mm PMIC L9733 28 Pin 5V 28-SSOP (0.295, 7.50mm Width) Exposed Pad

Manufacturer: STMicroelectronics
Origchip NO: 761-L9733CN
Package: 28-SSOP (0.295, 7.50mm Width) Exposed Pad
Datasheet: PDF
Stock: 661
Description: 5V N-Channel 0.65mm PMIC L9733 28 Pin 5V 28-SSOP (0.295, 7.50mm Width) Exposed Pad (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	30 Weeks
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.295, 7.50mm Width) Exposed Pad
Number of Pins	28
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Feature	PWM Input
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
ECCN Code	EAR99
Resistance	700mOhm
Terminal Finish	Matte Tin (Sn) - annealed
Subcategory	Peripheral Drivers
Technology	MOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	L9733
Pin Count	28
Number of Outputs	8
Qualification Status	Not Qualified
Output Type	N-Channel
Max Output Current	800mA
Operating Supply Voltage	5V
Power Supplies	5V
Interface	SPI
Output Configuration	High Side or Low Side
Voltage - Supply (Vcc/Vdd)	4.5V~5.5V
Max Supply Current	8.5mA
Input Type	Non-Inverting
Turn On Delay Time	20 μs
Switch Type	General Purpose
Output Current per Channel	1A
Rise Time	70ns
Fall Time (Typ)	70 ns
Turn-Off Delay Time	100 μs
Ratio - Input:Output	1:8
Voltage - Load	4.5V~18V
Driver Number of Bits	8
Fault Protection	Open Load Detect, Over Temperature
Output Peak Current Limit-Nom	1A
Rds On (Typ)	700m Ω (Max)
Built-in Protections	OVER CURRENT; THERMAL
Output Current Flow Direction	SOURCE
Height Seated (Max)	2.45mm
Length	10.3mm
Width	7.5mm
RoHS Status	ROHS3 Compliant

L9733CN Overview

As you can see, it's packaged in the way of a Tube.This package is included in 28-SSOP (0.295, 7.50mm Width) Exposed Pad.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.By default, it is set to output 8.To operate, it needs a supply voltage of 4.5V~5.5V.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has PWM Input.The L9733 family consists of this type.It contains 28 terminations.During operation, the 28 pins are used.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 800mA.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.28 pins are connected to it in total.Lighting drivers with 700mOhm resistance are used.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 5V.In order to maximize efficiency, the supply voltage should be set at 5V.A maximum current requirement of 8.5mA is required for its operation.