All Products

View All >>

IPS1031PBF

N-Channel PMIC IPS1031PBF 3 Pin TO-220-3

Manufacturer: Infineon Technologies
Origchip NO: 376-IPS1031PBF
Package: TO-220-3
Datasheet: PDF
Stock: 333
Description: N-Channel PMIC IPS1031PBF 3 Pin TO-220-3 (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	TO-220-3
Number of Pins	3
Supplier Device Package	TO-220AB
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
Published	2006
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Termination	Through Hole
Type	Switch
Resistance	40mOhm
Max Operating Temperature	150°C
Min Operating Temperature	-40°C
Power Rating	25W
Max Power Dissipation	25W
Current Rating	4A
Base Part Number	IPS1031PBF
Number of Outputs	1
Output Voltage	28V
Output Type	N-Channel
Max Output Current	9.5A
Operating Supply Voltage	36V
Voltage	5.5V
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Current - Output (Max)	9.5A
Current	9.5A
Output Configuration	Low Side
Power Dissipation	25W
Output Current	18A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Clamping Voltage	36V
Output Current per Channel	9.5A
Rise Time	20μs
Drain to Source Voltage (Vdss)	36V
Fall Time (Typ)	15 μs
Nominal Input Voltage	5.5V
Continuous Drain Current (ID)	6A
Ratio - Input:Output	1:1
Voltage - Load	28V Max
Fault Protection	Current Limiting (Fixed), Over Temperature
Dual Supply Voltage	28V
Rds On (Typ)	40mOhm
Drain to Source Resistance	40mOhm
Nominal Vgs	1.7 V
Height	9.02mm
Length	10.6426mm
Width	4.826mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	RoHS Compliant
Lead Free	Lead Free

IPS1031PBF Overview

As you can see, it's packaged in the way of a Tube.In the TO-220-3 package, it is included.It has been mounted as Through Hole on the LED driver.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.As you can see, it comes from the IPS1031PBF family.In order to operate, the 3 pins are used.There is a maximum output of 9.5AV from the LED driver.Maximum output current falls to 9.5A when operation criteria are met.In this case, it is mounted in the way of Through Hole.Currently, the LED driving board has a resistance of 40mOhm ohms.This case has the output current set to 18A.Optimal efficiency requires a voltage of 36V.For stable operation, the maximum operating temperature should be 150°C°C.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.It can handle a voltage of 5.5VV as its maximum supply voltage.It can operate at low supply voltages, such as 4.5V volts.Electrical components classified as Switch are included in this category.