All Products

View All >>

AUIPS7121RTRL

28V N-Channel PMIC AUIPS7121R 5 Pin 28V TO-252-5, DPak (4 Leads + Tab), TO-252AD

Manufacturer: Infineon Technologies
Origchip NO: 376-AUIPS7121RTRL
Package: TO-252-5, DPak (4 Leads + Tab), TO-252AD
Datasheet: PDF
Stock: 521
Description: 28V N-Channel PMIC AUIPS7121R 5 Pin 28V TO-252-5, DPak (4 Leads + Tab), TO-252AD (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	23 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-252-5, DPak (4 Leads + Tab), TO-252AD
Number of Pins	5
Operating Temperature	-40°C~150°C
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	4
ECCN Code	EAR99
Resistance	24mOhm
Terminal Finish	Tin (Sn)
Subcategory	Peripheral Drivers
Power Rating	2.5W
Max Power Dissipation	2.5W
Terminal Position	SINGLE
Terminal Form	GULL WING
Supply Voltage	28V
Base Part Number	AUIPS7121R
JESD-30 Code	R-PSSO-G4
Number of Outputs	1
Output Type	N-Channel
Max Output Current	60A
Operating Supply Voltage	60V
Power Supplies	28V
Voltage	60V
Interface	On/Off
Current	3.8A
Output Configuration	High Side
Power Dissipation	2.5W
Output Current	3.8A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Min Input Voltage	6V
Max Input Voltage	60V
Output Current per Channel	3.8A
Nominal Input Voltage	60V
Ratio - Input:Output	1:1
Voltage - Load	6V~60V
Driver Number of Bits	1
Fault Protection	Current Limiting (Fixed), Over Temperature
Rds On (Typ)	24m Ω
Height	2.3876mm
Length	6.7056mm
Width	7.49mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

AUIPS7121RTRL Overview

It is package in Tape & Reel (TR) case.In the TO-252-5, DPak (4 Leads + Tab), TO-252AD package, it is included.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is best to set the temperature to -40°C~150°C to ensure reliable operation.There is a default setting of 1 for output.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As you can see, it comes from the AUIPS7121R family.A total of 4 terminations have been found in it.For operation, we use the 5 pins.In order to meet the operation criteria, the maximum output current drops to 60A.High efficiency is possible at 28V supply voltage.In this case, it is mounted in the way of Surface Mount.It has a resistance of 24mOhm.In this case, the output current is set to 3.8A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.This part is powered by 28V.In order to optimize the efficiency of the supply voltage, it should be set to 60V.This LED driver can handle voltages up to 60V volts.It requires 6V volts as the minimum input voltage.