All Products

ADM695ANZ

5V16 Terminals 16-Pin ADM695 Voltage supervisor1 Channels Min 4.75V Max 5.5V

Manufacturer: Analog Devices Inc.
Origchip NO: 84-ADM695ANZ
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 846
Description: 5V16 Terminals 16-Pin ADM695 Voltage supervisor1 Channels Min 4.75V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to XINJIADA.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Additional Feature	RESET CONTROL
Subcategory	Power Management Circuits
Max Power Dissipation	600mW
Technology	CMOS
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	ADM695
Output	Open Drain, Push-Pull
Pin Count	16
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.75V
Operating Supply Current	1.95mA
Nominal Supply Current	1.95mA
Power Dissipation	600mW
Max Supply Current	1.95mA
Adjustable Threshold	NO
Watchdog Timer	Yes
Reset	Active High/Active Low
Voltage - Threshold	4.65V
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.5V
Max Reset Threshold Voltage	4.73V
Undervoltage Threshold	4.5V
Overvoltage Threshold	4.73V
Number of Monitored Inputs	1
Reset Delay Time	280 ms
Height	4.95mm
Length	21.33mm
Width	7.11mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADM695ANZ Overview

There are 16 terminals connected to this power management, which makes it easy to mount. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find 16-DIP (0.300, 7.62mm) functions for you to refer to. This IC power shares lots of benefits with other Battery Backup Circuit products. Manage ics operate at 5V supply voltages. Using Through Hole, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 16 pins on the board. This power management system has 16 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 4.75V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Open Drain, Push-Pull from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 1.95mA. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using ADM695, the base power ics number. It requires 5V watts of power to operate this voltage supervisor. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.95mA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.