7201LA15P

7201LA15P Overview

PDIP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Through Hole direction.When the supply voltage is 5V there is the possibility of high efficiency.28 terminations are contained in FIFO means.In the case of the operation pins, they are 28 pins.There is a maximum current requirement of 80mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.Currently, it has 28 pins.In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .There is 40MHz frequency set for the clock of the FIFO memory IC.

7201LA15P Features

FIFOs category
Clock frequency of 40MHz

7201LA15P Applications

There are a lot of Integrated Device Technology (IDT) 7201LA15P FIFOs Memory applications.

• Firmware loaders
• Consumer Systems
• Game Controller
• Portable Information Devices
• Networking
• Wireless
• Transistors
• Communications Systems
• Laser Receiver System
• Cameras